Kenmore Elite 61433 Owner's Manual download pdf (Page 20)

NOTE:

Do NOT remove any of the 8 screws on the face

of the cabinet (marked with

below). Doing so

could result in damage to the dryer and the need

for a service call to repair the dryer.

e. Remove the 3 screws on the hinge at bottom left.

Remove the hinge and reinstall it on the right side.

The top screw occupies the hole where you removed

the screw behind the hinge bracket in step d.

f. Install the hinge bracket removed in step d on the

bottom left side, first installing 1 screw behind the

hinge bracket.

On the Door:

CAUTION:

The edges of the door cover may be sharp. Wear

gloves when handling to avoid injury.

Lift off the door cover.

With the door laid inside facing up on a protected

surface, remove the 12 screws on the inside of the

door. Carefully lift off the door cover with the help of

a small flat-blade screwdriver inserted in the upper

corner (circled below).

hinge

cover

hinge

bracket

latch hole

cover

latch

mechanism

hinge

Cabinet Reversal complete

Hole

plug

Twelve screws

Side

Interlock

button

Switch the door strike and the blank cover.

Remove the 2 screws on the door cover that secure the

door strike.

Switch the door strike and the blank cover, installing

them on the opposite sides from which they were

removed.

It may be difficult to insert the 2 screws in the door

strike on the opposite side. Use a cordless screwdriver

if necessary.

Gently pry out the hole plug on the side of the door

cover and install it in the hole on the opposite side.

Set the door cover aside.

screw

Long

Short

screws

Blank cover Door strike

Pull

Raise

Remove blank cover

Hole

plug

REVERSING THE DOOR SWING (continued)

INSTALLATION INSTRUCTIONS

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 46 47

Comments to this Manuals

No comments

Kenmore Elite 61433 Owner's Manual Page 20

Comments to this Manuals

Related products and manuals for Tumble dryers Kenmore Elite 61433