Kenmore Elite 41073 Owner's Manual download pdf (Page 25)

CARE AND CLEANING

CleaningtheWaterInletFilters

If the washer does not ll properly, an error message will

show on the display. The inlet valve lter screens could

be plugged by hard water scale, sediment in the water

supply, or other debris.

NOTE: The inlet screens protect the delicate parts of the

inlet valve from being damaged by particles that could

enter the valves with the water supply. Operating the

washer with these lters removed could cause a valve to

fail to open, resulting in ooding and/or

property damage.

1. Turn OFF both water faucets completely. Unscrew the

hot and cold water lines from the back of the washer.

Carefully remove the lters from the water valves

and soak them in white vinegar or a lime scale

remover, following the manufacturer’s instructions. Be

careful not to damage the lters while cleaning.

Rinse thoroughly before reinstalling. Press the lters

back into place.

Before reattaching the hoses, ush the hoses and

water lines by running several gallons of water

through the hoses and into a bucket or drain.

MAINTENANCE

Inlet Filter

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 65 66

No comments

Kenmore Elite 41073 Owner's Manual Page 25