Kenmore Elite 77247 Owner's Manual download pdf (Page 10)

INSTALLATION INSTRUCTIONS

Pull each curtain panel out until it meets the window

sash track. Pull the bottom window sash down

behind the upper guide until they meet.

Front Angle

Sash Track

Upper Guide

Inside Window Sill

NOTE:

Do not pull the window sash down so tightly

that the movement of the curtain panels is restricted.

Attach the cabinet to the inside sill by driving 3 type

B screws through the cabinet and into the sill.

Sash Track

Front Angle

Screws (Type B)

NOTE:

Install the cabinet with a very slight

downward tilt toward the outside.

CAUTION

Do not drill a hole in the bottom pan. The product

is designed to operate with approximately ½” of

water in the bottom pan.

Use a screwdriver or power drill to attach the

curtain panels to the window sashes by driving type

C screws into the sashes through the cabinet holes

shown in the figure below.

Screws (Type C)

With the aid of an assistant, slide the unit into the

cabinet. Reinstall the screws removed from the

cabinet sides in step 1.

CAUTION

•

The unit is heavy. Use an assistant to help lift the

unit and set it in place. Lifting and maneuvering

the unit by yourself could result in injury.

•

Hold the unit firmly in place until the window

frame is lowered to meet the top surface of the

unit directly behind the upper guide. If the unit

falls from the window, it could cause personal

injury or property damage.

Cut the non-adhesive foam strip to the proper length

and insert it between the upper window sash and

the lower window sash.

Foam Strip

(Not adhesive

backed)

Attach the window locking bracket with a type C

screw.

Window Locking Bracket

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 41 42

Comments to this Manuals

No comments

Kenmore Elite 77247 Owner's Manual Page 10

Comments to this Manuals

Related products and manuals for Unknown Kenmore Elite 77247